2.00mm Box Header 180° H=6.40mm Connector

Introducing the "Bend It Like Box Header"! This 2.00mm Box Header 180° H=6.40mm Connector is not your average connector - it's a flexible marvel! With the ability to bend at a 180-degree angle, it's perfect for those hard-to-reach corners in your electronic projects. Need to squeeze your circuitry into a tight spot? No problem! This connector will contort and twist like a yoga master to fit your needs. Not only does it have brains, but it's also got style with its sleek design. So go ahead, give your circuits a little twist and turn with the "Bend It Like Box Header"!

Shenzhen Antenk Electronics Co., Ltd. promoted a 2.00mm Box Header 180° H=6.40mm connector.

For RF coaxial connectors, there are electrical indicators such as characteristic impedance, insertion loss, reflection coefficient, and voltage standing wave ratio (VSWR). Due to the development of digital technology, in order to connect and transmit high-speed digital pulse signals, a new type of connector, namely high-speed signal connector, has appeared. Correspondingly, in addition to characteristic impedance, some new electrical indicators have appeared in electrical performance. Such as crosstalk, delay, skew, etc.

SPECIFICATION
Current Rating:                       2.0 Amp
Insulation Resistance:            1000MΩ  min
Contact Resistance:               20MΩ  max
 Withstand Voltage:                500V AC/DC
Operating Temperature:         -40°C  to  +105°C
Contact Material:                    Brass
Contact Plating:                      Au or Sn Over Ni
Insulator Material:                  PA6T+30%GF UL 94V-0