Right Angle 20 Pin DIN 41612 Connector

In terms of connector functionality, insertion force is an important mechanical property. The insertion force is divided into the insertion force and the extraction force (the extraction force is also called the separation force), and the requirements of the two are different. There are maximum insertion force and minimum separation force regulations in the relevant standards, which indicates that the insertion force is small from the point of view of use (thereby having a low insertion force LIF and a structure without ZIF insertion), and if the separation force is too small, It will affect the reliability of the contact.

Product Information:

1.No.of Contacts:  20P

2.Termination:

 B:Right tail length H=3.0mm
F:Right tail length H=4.4mm
M:Right tail length H=13.0mm

3.Rows Loaded With Contacts

A:Row a+b     

C:Row a
C1:Row a+b(2,4,6...)

   SPECIFICATION
Current Rating:                       2.0Amp
Insulation Resistance:            1000MΩ min.at DC 100V
Contact Resistance:                   20mΩ max
Withstand Voltage:                    AC 1000V For 1 Minute
Operating Temperature:         -55°C  to  +105°C
Contact Material:                    Brass
Contact Plating:                      Au or Sn Over Ni
Insulator Material:                   PBT+30%GF UL 94V-0
Insertion Force:              20 pin max.18N
Withdrawal Force:           0.15N min.per individual contact