Sim Series 8pin Card Holder

8Pin Mini SIM Card Sockets

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 2000K/month
• Min. Order: 1000 Piece/Pieces

8Pin Mini SIM Card Sockets 1.SPECIFICATIONS INSULATION RESISTANCE: 500M min.AT DC 500V DC WITHSTANDING VOLTAGE: 250V ACrms FOR 1 MINUTE CONTACT RESISTANCE: 100M max. AT 10MA/20mV max CURRENT RATING: 0.5A VOLTAGE RATING: 5.0 vrms OPERATING TEMP.RANGE:-55 C+85 C MATING CYCLES: 5000 INSERTIONS 2.MATERIAL: INSULATOR:...

Contact Now

6Pin Mini SIM card Front Connector

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 2000K/month
• Min. Order: 1000 Piece/Pieces

6Pin Mini SIM card Front Connector 1.SPECIFICATIONS INSULATION RESISTANCE: 500M min.AT DC 500V DC WITHSTANDING VOLTAGE: 250V ACrms FOR 1 MINUTE CONTACT RESISTANCE: 100M max. AT 10MA/20mV max CURRENT RATING: 0.5A VOLTAGE RATING: 5.0 vrms OPERATING TEMP.RANGE:-55 C+85 C MATING CYCLES: 5000 INSERTIONS 2.MATERIAL:...

Contact Now

10Pin Micro SIM Card Holder Socket

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 2000K/month
• Min. Order: 1000 Piece/Pieces

10Pin Micro SIM Card Holder Socket 1.SPECIFICATIONS INSULATION RESISTANCE: 500M min.AT DC 500V DC WITHSTANDING VOLTAGE: 250V ACrms FOR 1 MINUTE CONTACT RESISTANCE: 100M max. AT 10MA/20mV max CURRENT RATING: 0.5A VOLTAGE RATING: 5.0 vrms OPERATING TEMP.RANGE:-55 C+85 C MATING CYCLES: 5000 INSERTIONS 2.MATERIAL:...

Contact Now

3 PIECES AA Battery Holders with wires

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 2000K/month
• Min. Order: 1000 Piece/Pieces

3 PIECES AA Battery Holders with wires NOTE: 1. HOLDER MATERIAL: POLYPROPYLENE 2. SPRING MATERIAL: MUSIC WIRE, 0.7 DIA. FINISH-NICKEL PLATED 4. #26 AWG WIRE, STRIPPED & PRETINNEDED ENDS UL/CSA 1007 5. ALL SPRINGS TO BE ALIGNED BY CENTER LINE OF EACH SPRING, MIS-ALIGNMENT ALLOWED UP TO TOTAL 0F 0.50

Contact Now

DOUL AAA BATTERY HOLDER THM

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 2000K/month
• Min. Order: 1000 Piece/Pieces

DAUL AA BATTERY HOLDER STM Specifications: 1.Type: SMT1、BASE: MATERIAL:HEAT RESISTANCE NYLON,BLACK. 2、CONTACT: MATERIAL:0.30 THK STAINLESS STEEL FINISH:GOLD FLASH,OVER NICKEL PLATE.

Contact Now

DAUL AA BATTERY HOLDER STM

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 2000K/month
• Min. Order: 1000 Piece/Pieces

DAUL AA BATTERY HOLDER STM Specifications: 1.Type: SMT1、BASE: MATERIAL:HEAT RESISTANCE NYLON,BLACK. 2、CONTACT: MATERIAL:0.30 THK STAINLESS STEEL FINISH:GOLD FLASH,OVER NICKEL PLATE.

Contact Now

Coin Cell Holders FOR CR2032

• Brand: ANTENK
• Packaging: bag packing,Tube packing, reel...
• Supply Ability: 2000K/month
• Min. Order: 1000 Piece/Pieces

Coin Cell Holders For CR2032 1.MATERIAL: a.HOUSING:PA66 b.CONTACT:PHOSPHOR BRONZE (SURFACE PLATING: Sn 100u"-120U") 2.ELECTRIC: a.CONTACT RESISTANCE: 30 mΩ MAX b.INSULATION RESISTANCE: 1000 mΩ MIN c.DIELECTNIC VOLTAGE: 500V AC ONE SEC LEVEL d.OPERATING TEMPERATURE: -25°C~ +85°C

Contact Now

BBA-5-4-B-S-478CN 4 PIECES AA Battery Holders

• Brand: antenk
• Min. Order: 1000 Piece/Pieces
• Certificate: iso9001
• Model No.: BBA-5-4-B-S-478CN

BBA-5-4-B-S-478CN 4 PIECES AA Battery Holders With Series Connection 1、Introduction The precise sort of 12V battery you might need for specific applications will dictate the appropriate form factor, which can be anything from a large heavy car battery type to one closely resembling a traditional AA cell. With larger...

Contact Now

DUAL 12mm PC BATTERY HOLDER FOR CR1212 CR1216

• Brand: antenk
• Min. Order: 1000 Piece/Pieces
• Certificate: iso9001
• Model No.: BT-S-SN-A-501

BT-S-SN-A-501 DUAL 12mm PC BATTERY HOLDER FOR CR1212 CR1216 CR1220 CR1225 1、Introduction Due to the increasing efficiency of many device types, AAA batteries are often found in more compact pieces of equipment that would typically have been expected to run off double-A cells in years gone by. Today, these will very...

Contact Now